Hello friends welcome to your art channel
in your hands we continue with everything Christmas decoration then for this
occasion we will share how to perform this Thursday a big doll normally
we share ideas that are very simple very easy to do in
small loan sizes we wanted share a project that was
big doll measures 1 meter with 10 centimeters all step by step is
explained in scratch then no We hope you like it
remember to give us your like share the video we read all
comments that leave us and remember that there in the description in the part
low we leave the link of the molds of this project and of all those who
we share remember subscribe there on the red button the
drive and also activate the bell for notifications to arrive
of all the new videos that we are sharing like this you can interact with
we in the chats that we are performing on each new project and
clear all if you suddenly want three contact us at
another project like this one that we have suddenly thought a santa claus santa
Claus leave us here in the comments if you want us to share it, we read all
all comments Today I want to greet our members
of the channel are five members who in this moment are supporting us this me
la vargas and a cardona maría alonso de use mary batista and load on donkey and
we also want to greet on this occasion yellow failures than in the previous chart
student adapting a lot with us then you know we give them
Cheers open by this means the channel members are people that each
month make a contribution to support the channel if you want to do it there is also the
option for you like the videos the molds always remain free
so we hope you join us in all step by step so you learn to
make this beautiful doll here in art in your hands and to carry out this project then
we need this material that they find today at my work table remember that
in the description that remains here in the bottom
there I will leave the complete list of materials but if they like
teach them so that product have other options and if not
they find exactly the materials what do I have
of that fabric this is the same felt Spanish itself but it was felt they have
covered with a mesh to which they have applied stamping then that’s why
look like this these colors can be used whichever he finds in the
market in this project mainly going to use this we are also going to
use the polar fabric flysch or also the pañol itself serves us but let it be
soft to give us that texture that is
snow the doll as such the orange tone and the black tone also depends on
colors that you want to combine with the doll then these colors vary
is the fabric we are going to use come on to get from these
these are half spheres of icopor they also call him unicel a polystyrene
anime is has several names depending on the country
is this the only one because normally the sphere is missing or we so
least we don’t find it complete in we all bought two socks
spheres but one would go would be the full sphere if they have another name of
his father as they call the ico by the polystyrene or porexpan then do not
leave there in the comment box so that many of us know how to
they call and so we can get of that same material we will get
six sphere number twelve these are number 12 we are going to
make a decision in the center more Go ahead you can explain how we are doing
to make the hole of these we need six too and those of all
possible colors that we have used in the project in the structure we are going to
use these mdf tables that are agglomerates for the structure and the
stick the rack is going to be from a centimeter thick here I have it a
little work of this one
if it measures an inch thick it is a frame that is of good consistency
sometimes there are also some raft but the raft is a softer way of
know we need a little thicker we will also use cotton
silicone filling synthetic alcohol and what is for the filling in the
hot silicone 1 meter of that golden cord yes that is very pretty for
decorate half eye spheres and we will use this technique or if
they will paint as in other projects that I have shown you the skewer stick
you are a beak file the gold will used a lot for manicure but in the
projects whether for word is needleless or in this case that will teach them how
perform in the sphere in the hole in the spheres these we are going to use the
needles and pins tools if all everything is there in the little box of the
full description the list of materials and with this then
we start like all other projects
that we have done in this one too we will share the molds and you
they know that the molds are free and that you find them on the blog and on the page
on facebook art in your hands with lily and sham on facebook you look for the picture
of the project when you are in the photo of the project among the
comments are each of the molds you can see us up to the nose which is a
piece of gloves are four pieces but teaching well for the foundations of
the shoes are two pieces one for each shoe
these are the molds of the shoes are four pieces and two for each foot it
can be putting here this is how they are giving an idea of ​​how many pieces I am
cutting for the arms are four two pieces for each arm here by
example is the mold as indicated that we are going to cut in the mold are going to
find two molds one is part of the lower part of the
old leg and there’s the part superior then when I say join mold
then they will join the two pieces to to arm them only one so those they
those of the legs of this length are the Legs when I double it, be here
fold the fabric has to be folded and only here is where we end
here it is folded this is going to give us the total thickness of the doll’s leg
snow and I’m going to cut two the same because it’s two legs
of the body like what to agree the body that will fill us or will
cover the greater sphere the sphere of 30 number 30 we are going to buy
that’s the double placed the mold that that mold will find three pieces
to form a mold and to make the body let’s cut two and which ones
molds indicates bodies in each one is the body body body this you know that
that is part of the body and I’m going to identify the most normal is that they have
egg lettering with beech that I will put with I looked like this so that they are located and can
cut fabrics the size that we need to make the doll and cut
two pieces one that will make up the front of the sack diver
of the doll and the same back well look here I put them baby
thing that the pieces come together and you can cut well then
what is the south and this is part of the ground sleeves are two pieces here
I’m going to show you some pieces that I have already assembled that I have already sewn
so that’s how we are doing less is the body
remember that I told you that only here in the outline we are going to sew the
top not for now not because out there we will introduce the spheres and
then let’s darken then this part we set it aside here then we are going to
drink little by little I will explain this to you
the sweater here I have it upside down in this piece we will know only here to
one side the other end that we have left of this side at the top
I’m just going to make a little stitch of one centimeter to each of
the sides to start giving form this sweater or this sack you are
are the sleeves I also have them at upside down here only what i did was
sew from the end of this end that see the straight part that would be the part of
the sleeve the part where it is located here on the wrist there we will sew
to the top where it goes to start the curve
there we will leave her free because where are we going to sew the sweater now
and shape the piece but that will I explain now but it is for them to go
moving forward and so we are taking each one of the pieces
the head of the simplest is the circumference we leave in the part
go down a hole where we are going to fill in and we will introduce one of the
racks only the contour is sewn and get ready the legs are also
very easy to do here are both pieces are sewn only in one of the
sides and the rectangles will remain lengths that are each of the legs
either right or left then these are the pieces
now let’s shape the arm but here you get it in the part
higher I left a hole in the straight part that
is where we are going to introduce the glove it is open so the
glove on the part where it is introduced is so to speak hands like this also
leave open because this we are going to open in one piece
here I have a little advanced but I will explain to you time what I did
here I put it in the outline I give the back to the piece A) Yes and this is the arm is still at
back then with the right glove I am not going to introduce inside the arm in
this position I look for the curve is up
then the finger if the glove and this finger will also be facing up and
I’m going to introduce it then with pins I start to accommodate
the piece so we meet where it join the positions be united here and what
same on this side and we will stay in I already have this position ready with the
pins to start sewing the stitch is the straight linear stitch by
all the contour so that we are left united now I’m going to harass you and I’m going to
teach then how to give the result of arms I have left aside
now I also have the boots this is one of the boots then here I just sewed
on this shore I joined the piece and what we shape the boot the top
he did not harass her or the base part of the shoe here is the piece and here I am going to
teach what are we going to do these same What is it that I just taught you just
that in the base part I already have it adjusted with the pins to start
to sew the same straight linear stitch all over the
contour so that we are already armed the boot or snowman shoe
then I will start working these pieces and taught them how it looks here I already did the sewing by
all the outline as you can see I used the black thread all around and in
the top that I left the hole then over there I’ll turn it over
the piece Here I will teach you how would it look
this is an arm then we take out the piece well and fill
very well with siliconized cotton fill the piece well and in the part
superior we would close stiff the same now they would teach them anyway then what
same I will do with the two pieces I also made the shoes
I will also teach them so that she known our arms would be ready
the shoes are ready I’m going to show you I’m going to teach you so
we are shaping other parts of it of the snowman’s body like
you can see the arms are big that there are dolls we will also
big in shoes the same with what I did was take the template to sew it for
the shoe let’s turn and so we are shaping the
shoe of the moment when we start filling in that will
allow it to have a better shape it doesn’t show much here it doesn’t show of shoe and now we have the other
as well and now I’m going to take remember the
wooden stencils they have a chopped a hole that is the same
frame size the one that will hold body structure then you are
I’m going to introduce two inside the shoe being careful not to
we are leaving the museum we are adding the work we do
This is to give the form and base to what are the legs when we have like that then too
we begin to locate the frame what we glue with white glue or silicone
according to the case but I prefer in this case the white glue is distributed
very well the piece for everything the wood that is giving us the form
exact base well then we introduce the base
in wood now let’s introduce the empty the racks that we are going to
use are one centimeter thick and 50 centimeters long are
50 centimeters we will use wood glue or white glue
because of good quality we will apply on the bottom to fix it
to the base you see here look for the hole here is the hole
and very introduced then the void we pressure
how good we withdraw the
in excess and we wait for it to dry well when it has already dried
then let’s take I have already
the siliconized tree we are going to take then cotton and we started to
fill the shoes and very carefully we started filling it out to shape it
to the shoe of this snowman and so we do then with both of us so we go
leaving advance at least on that moment shoes well then here to advance a
little what I did was to refill my arms you already saw how we turned it
all you have to do is enter something silicone cotton evenly
for all the arm that we have left soft but rather be in a
middle ground for constant padding what do you want like that
firmly from here I will seal the hole through which he introduced the
cotton a simple stitch already having shoes
fillings ready then let’s start to work on the ccoo spheres for
here what we are going to do is that we are going to open a hole from side to side as well
as you see it here from side to side to be able to introduce them in the racks
so to do what I do is take the measurement and the entire outline of the
sphere in this case it says that the sphere has
a measure of 31 centimeters and a half so what I usually do is
point with the pencil pointed when pointing I’m leaving half past 31 and half
it is approximately 16 centimeters from that point I measure 16 centimeters to
give me on the other end if you they are not here gives exactly that is what
I do there is also point out so then we are accurate
all over the center that we have left hole throughout the center of the sphere
and after that I will take a stick of skewer of these that are firm that
be good and I’m going to start introducing and I’m going to try to get the stick to
other end exactly where I dial the 16 centimeters and so we will be
that at the beginning we will have a smaller hole because the stick of
thinner skewer yes but then with a lime from these parrot beak
start entering and start giving turns to take out the ico because I know more
in the center or also that I can help with this spearhead scalpel
I’ll introduce it anyway and start giving turns are going to make the circumference
what I need is exact to the size of the vacuum if there is one
centimeter then so I will do with the six spheres are three per foot
and now what I’m going to start doing is I will introduce only one of the spheres
here I will approach and here the church one of the areas that I will introduce
and you have to fit right here where is the boot where the shoe is like that
but how do we want these spheres look like this then let’s cover with
fabric that’s why the fabric of the legs is this rectangle that I’ve already
sewn here aside is among the Yasabe molds here I will give
laps and I will begin to locate what to do with the boot on the side
higher I’m going to introduce the fabric
as you can see then i will try cover the side sphere now to climb
a little because I need it to cover me totally
to be like that and I’m going to start darning this part the
expected I can upload a little more all a little more for with
greater accuracy to the south been going to take the thread
and I will begin to emerge the fabric about 55 millimeters
I start darning because I need this part to be
well attached to the frame as you could see then here yes very
well to knot and pressed the icopor sphere towards the bottom yes here like that and then we have to locate the
first sphere now glued with silicones and first I will locate all the spheres
and then there if I start hitting with silicone already on top as
I still have cloth and where is the fabric I will introduce the other two
spheres I will teach you well I will fix a
little camera and then I teach them as introducing the other spheres
well here then I already have the leg here is the shoe here not yet
I hit the piece of the ico by not yet and on top
so this is if the fabric suddenly we have been a little longer
then we cut to a level that we now allow darning the upper part or
if it’s exact then we leave it like this in the molds I will leave them exact
so they don’t have the point that I’ve cut wasting cloth then here
at the top I will do the same I did at the bottom to take 5
centimeters to next 5 millimeters sorry about and I’m going to start
arise here I will emerge and ensure well if the top
we will ensure it well to be able to tie after this then in each of
the spheres that is in the center of each one of the unions never waits but in
the union between sphere sphere let’s do the same process let’s darken the
fabric so that you don’t like that we are covering each of the spheres
then we would be more or less like that already I’m going to do it taught them how it looks well here we finished we saw the
ways we wanted suddenly get on the legs if of
soon they would like to put a cord for that will be much more defined
separation a silver or colored cord or it can be in the same white color
they can make them would also look very nice at the end of a moment we will see if
I put or if the story stays like this which for now I’m going to put a little
camera more than anything in the part of the boots because then that’s the moment
where am I going to stick the boot to work that we just did on the legs i did
until the end hoping he aimed yes I needed to take your rusty account off
I needed to run a little longer frame or spheres then why
I did until today we will start with the hot silicone
and gout let’s start applying and we are hitting
so this piece is totally united what what are the boots and legs later we will decorate a little
so for now we’re just going to dedicate to paste now let’s start working on
body like these spheres at least here in my country I have not found them
fully armed to complete the spheres and averages then what are we going to
to do in that moment is to join the you they can join it with white glue or
with liquid or also hot silicone but with the hot we drive
temperatures because we don’t want to soon we are going to melt the
silicone we apply them a lot all around and let’s see then the two halves
an example that I would like put lights that illuminate the doll what
could you put in this moment for a Christmas lights installation in the
inside and they would be illuminating while the doll’s clothes are from
soon shake silver totally the snowman that
will be completely beige or white but as I am going to use in this
project colored fabrics then by that does not apply so we have left we place well and let dry
when it is totally then united the two half spheres and according
in a single then in the lower part in the bottom we are going to do two
holes these two holes is considering the distance that
they have legs that have the legs when I put them
standing with this totally standing that I’m going to make the measure
I put the same sphere above where I place the racks remain and there then
framework and as it says with the smaller spheres with the stick of
skewer I introduce initially and then either with the lime beak of parrot or with the
spearhead scalpel I start to introduce and eat so to speak the
icopor space in those in the holes this considering in the
bottom that is centered on the body and on top I am going to
make only one that is also where it fits a frame the same size as
we use the one with the legs of 50 centimeters long and thick is
one centimeter let’s make a hole this dress would be we would put the
head when it’s time to work and head we will do for him
moment is that we have a piece yes whole this piece we put it to
right we have already worked it and now that we cut the cloth and started them
a teeth we met her already in this moment is right and what we are going to
do is enter the ccoo sphere for in this bag you can say that
we made tea considering the holes that are back here for now
I’m going to introduce it like that and then with a with very good tip scissors I go
to chop the fabric a little so that it gives me the exact hole where I need it located cities inland
the top hole yes that we need for the head and now
doing the same thing I did with the legs let’s darken all this part
superior we will suffer very well for that is located here in the center and
on the bottom Now I locate where the holes are
normally it does not backlight them and it you will notice here there is one and here it is
the other but I hope it touches us more close to the union of the fabrics so that
we fit better and stay more fine work well already at the top here
we emerge the fabric we leave the hole by where the rack is going to be inserted that
would join the body with the head and in the lower part then we locate
the two holes that will be in the legs and then let’s take the
spearhead scalpel and let’s do the cut the fabric as it tends to do
It allows us to expand what we do holes
and when it’s done well here let’s know that you can enter there
the frame would already be located in the body
here is the other well we press we break the fabric thinking we can use the same
frame with which we will introduce or a pencil
to enlarge the hole of the fabric and already coming then to
insert it in the legs ok here then we already apply the
silicone is sticking we let it dry very well and in the meantime then we go
to start working what would be the sweater
so to start hitting the arms then when are we going to start
work the sweater here I already have then the piece remember that this already
share it also among the molds here is the part that is like
that of the body which normally covers the body and these is one of the sleeves
here it is the other way around I’ll put it on law it is the right the straight part that
make and straight is asia in the part of the sleeve as such of the fist and is already in the
part of the sleeve that will be attached to sweater if it’s on this side I’m going to put
to the right and internally considering the union would be
down with the inner part then I’m going to start joining them with
pins to later be able to sew it center the pieces well
I help with pins always looking for the center of the pieces
so that we stay even we fit United and what I’m going to do is that we have left
as stella here the other side of the manga I have it ready with the
pins and I’m going to start sewing it sew straight stitch point align as
you know her leaving approximately depending on the
seam tolerance that you have left 5 millimeters to a
centimeter is usually left and we start sewing to join the two
pieces well here I just finished sewing
I turn around and we have left the armed sweater
if we are not going to stay then the sack the neck will suddenly ask the
wide as is a sphere and we need introduce it what we are going to do is
look the same as we did with the part with the fabric with which we formed the sphere
We also emerged for this to give us that we stay a little tighter too
in the body now that they are already located we will suffer a little so that the
sweater give us as a little picked up at the waist and so we better
then at this moment we proceed to stick the arms we will use if with
the hot hot and then to the extent that we keep in mind that this is the
neck we put them here at sides remember that with hot silicone that we hold we have to hold very
well the piece so that we are not going to take off but apply enough silicone
and hold for a few minutes until dry completely Well, that’s how it looks then
they are well attached you have to hold it and paste well for several minutes
parts that suddenly part silicone then apply again so that the
the arms are very thin as soon as to the sweater he had initially said that
the top was going to arise for that will be knotted just as it was done
in the part as the body was lined this part here I have for the moment I have there
the frame put the case is to have the head at the moment I don’t need it
true what I did not use them but I did the internal seam that went away
seal the piece in what was sewn and leave a hole where we are going to
introduce the dress are already the sleeves ready then now what I’m going
to do is and the sweater to start shaping the project to
sometimes it is good arrives early on work
we produce this we put the sweater we accommodate the piece well and in the part
come down as we will suddenly have a little loose let’s make a small one
little darning let’s just put bastian and squeeze it a little so that
we stick to the circumferences and to fit something here the bag was ready
I put the doll in another shot you can see how it looked
then in the lower part like them indicate is not attached look what you
I did was take thread hitting him for all the contour so it would stick
like who says to the body then and it will be better presented than
normally how are you are fabrics and not they are exact molds for a human being
but it is for a doll then it looked like stretched as well as
jeton to put it that way is a say it 3 Now that I made this outline that
it already worked well I’m going to do stuffed tubes you can do it
in the same fabric in other Spanish fabrics if color contrast put it in the
who wants it but these stuffed animals they look like snow and
they are very beautiful worked this way the whole contour I will paste so much on
the sweater in the lower waist as what
plasman well, so far, those
are the details that we have already said put the sweater on it was put on the
waist and cuff contours of the sleeves already got a stuffed animal
we already turned then to the mold that corresponds to the head and we are going to
start filling then you can and then that at the head you
It is very well filled and in the part of below we will start closing but
we consider how we are going to enter in a rack so that
hold because the weight of the house is a lot for the body then we have in
notice that the frame fits us if you we put we put here in the center and
we have in mind is then leave that small space then we sew
to stalk ready after having then already the
head completely full and also with the rack space let’s start
to work the nose in the nose let’s make a festoon tada type buttonhole
dragon stitch as they say in several countries and this one we are going to do
on the outside as well to shape it we are going to do this seam until
final here I already have the nose and the
would more or less place in this distance and in around a pencil mark what
it’s a smile i will use thread to address black can use
also spheres and paste in all the contour can be an idea this i did
two threads is double would remain as if were four threads with which I am going to
address and I will start then make smile expression we introduce and let’s start
for giving that’s how the smile goes we can return it if we wish to
make it a little thicker if we want It is not necessary
or here in this part we can make a small knot and it is ready then the expression A) Yes
now you can use these buttons that are half spheres to locate the eyes
and the decision of each one or if they want you can paint them in other videos already
I shared how to paint then also in this video I want to do it
I want that snowman than with the expression painted with fabric paints
Well, what I did here was draw some eyes if it is a normal drawing of eyes
then I’m going to start pointing the as in other videos I’m going to explain
gradually explaining that I am going performing on them and I put them on
quick camera in if the process is already filling as such from the paint then
let’s start with the white tone well I already have totally full in what
which is the black part now too with the same black color I’m going to start
outline the entire eye contour to to give us more depth more
expression to watch as you can see I applied a little blush
and now what I’m going to do is paste the nose the paint at the moment yet
it’s fresh then after the nose we let dry very well and there if we locate
the frame in the body and we paste the head with silicone and we located we pressure so that it is well fixed
you have to wait for it to dry well and when, then, as I told you, be
totally dry both the paint and the nose glue
so if we already hit the head here I will make the hat then at
hat I’m going to fold the fabric it’s going to cut it upside down it will mark
also upside down by folding the base it must be 30 centimeters in length
total will be 60 centimeters wide and the top of the hat is going to be 50
centimeters long and you decide if you make it shorter or longer it goes
of your taste then here what what I did was that I took the base of 30
folded to the fabric and I make a kind of triangle but this triangle is not going to
be perfect that is not going to be a 90 degree triangle but it’s going to
have a small curve so in the time to put on the hat give us a
beautiful curve and we look good hat of the snowman then so what
let’s cut here as you can see now I cut it that’s the way it’s going to take
now what I’m going to do this is going to sew for all this
all over this shore leaving approximately average tolerance
centimeters one centimeter maximum all of them joining us will be the
fat in the part where we are going to introduce the head so that we are left
a little more chubby we can put stuffed animal or the same fabric we make a
roll as we did with the stuffed animal that se colocó en las mangas y en el en el
suéter o saco y lo ponemos en el contorno para que nos decore
y así entonces ya le di el terminado el gorro le puse peluche en el contorno
como les dije ahora y en la parte superior le pegué un pompón para que le
dé más decoración ya así entonces lo que hacemos es poner la cabeza dentro de
acomodamos que nos quede como queremos para que no se nos vaya a
mover o no se nos vaya está zafando lo pegamos con silicona caliente y ahora sí
ya como queda listo podemos unir entonces la cabeza al cuerpo
ya tenemos bien pegado también el vacío si este bastidor da hasta la base de la
esfera en la parte de abajo o sea que tiene 50 centímetros y entonces ya
tenemos aquí la guía en la cabeza lo que vamos a hacer es introducirla
y buscar que nos quede en el centro y cuando hayamos ubicado totalmente
entonces ahí si pegamos con silicona caliente luego acomodamos el gorro como
más nos guste como mejor nos parezca y también en ese momento después de pegar
aquí pondremos la pañoleta bueno esta es la pañoleta del mismo tono
que se hizo el gorro ustedes miran si el producto que buscan otro contraste de
color o si quieren otra tela eso ya decisión de ustedes la medida es de 110
x 16 centímetros si usted la quiere más gruesa o más larga ya es decisión de
cada uno en los extremos podemos hacer también un flequillo normalmente se los
he enseñado en otros vídeos aquí también lo voy a hacer para que lo recordemos
esto es normal de esa tela el español ence abierto que viene ahora
estampado ésta es la malla que le ponen encima en este proyecto para que nos nos
ayuda mucho hace que sea muy bonito pues vamos a hacerle un flequillo a la
pañoleta al a la bufanda perdón mire el efecto que nos da en el extremo
si la consiguen igual perfecto si no recordar tiene el mercado y muchas
muchas telas lindas pueden de pronto comprar una bufanda de que sea económica
de baja calidad y lo pueden poner en él en este muñeco como de grande entonces
pueden comprar bufandas que son para niños sean niños más o menos de unos 4 o
5 años que las bufandas las encuentran a veces entonces pueden ponerle una real
si no hacen así como yo y les quedaría asientos de la bufanda
voy a hacer otras decoraciones que ya en un momento les voy a enseñar y como
pueden ver entonces hice con cordón dorado de un tamaño medio no es grueso
ni está un poco el delgado hice como simular unos cordones o unas agujetas y
los pegué con silicona en el contorno lo que se puede como medias este la esponja
de otro proyecto que nosotros utilizamos en otro vídeo entonces yo guardo los
retales esos retazos a veces nos ayudan mucho a darle también color que a que
otros proyectos queden muy bonitos y no los desechamos sino que los guardamos y
si los podemos utilizar en este proyecto que les voy a hacer un acercamiento para
que miren cómo queda la tela esponja muy bonito es el corte teniendo en
cuenta el contorno de la esfera como que nos queda la bota en la parte de atrás
lo pegué con silicona también lo que hice fue que donde se hicieron los
subsidios entre las esferas también pegué el cordón color plata para que se
viera un poco más decorado más fino allí está por ejemplo en los extremos la
bufanda con el flequillo que les digo que queda muy lindo y miren cómo queda
la bufanda y así nos va quedando entonces ya el cuerpo de el muñeco de
nieve totalmente ya terminado en su gorro el pompón las expresiones ustedes
pueden poner esferas y no quieren pintar pueden poner ojos plásticos que venden
muchos hay muchos ojos que venden también en el mercado y les pueden ser
de ayuda igual en este vídeo al igual que nosotros les he enseñado varias
veces cómo se pintan los ojitos esto ya tienen de pronto una idea más clara que
puede ser también de ayuda déjanos por favor en los comentarios allí abajo en
los comentarios no en el chat en los comentarios si te gusta ya que
compartiéramos también técnica cómo hacer un santo un papá noel
si queremos de pronto saber si les gusta la técnica sí sí quiere que se les
enseñe que nos dejan allí en los comentarios si les gustaría que
realizáramos este proyecto este muñeco como pueden ver para grabarlos un poco
más difícil porque es grande este muñeco mide un metro con 10 centímetros a que
es más bien grande todo eso lo dificulta de pronto para hacer algunas tomas más
en nuestro caso que nos gusta enseñar bien los detalles no por encimita sino
enseñarles bien los detalles para que ustedes puedan aprender eso es algo que
nos caracteriza a nosotros en el arte en tus manos que la idea que nosotros
queremos compartir enseñarles y de verdad ustedes aprendan con nosotros
regalarnos tú me gusta suscríbete allí en el botón rojo que es gratis y activa
la campanita para que te lleguen las notificaciones cuando estrenamos vídeos
para que puedan participar en los chats y despejar dudas también compártelo en
redes sociales en whatsapp en instagram en todas partes compártelo compártelo
para que muchas personas conozcan las técnicas y también aprendan ya sea para
que decoren su hogar en navidad para que vendan para que regalen si
déjennos todos sus comentarios que nos encanta leer todo lo que nos escriben
entonces nos vemos en un próximo vídeo aquí en tu canal Arte en Tus Manos